中文 | ENGLISH | Россия
 
 
 
  Products & Technologies
 
Plasma Ignition and Combustion Stabilization System
Mini Oil Ignition and Combustion Stabilization Technology
Dual-scale Low-NOx Combustion Technology for T-firing boilers
LYSC Low-NOx Combustion Technology for wall firing boilers
Other
* Comprehensive Energy-saving Retrofit Technology for TPP
* Comprehensive Retrofit for CFB Boilers
* Intelligent Combustion and Operation Technology
* Intergrated Control Technology for High Temperature Corrosion on Boilers
* Numerical Simulation and Simulation Calculation Technology
* Media Gas-gas Heater Technology
 
 
 
Intelligent Combustion and Operation Technology
 

 

Intelligent Combustion and Operation Technology

The frequently changing coal quality, low-NOx combustion, desulfurization and other factors result the problems of poor peak load regulation & combustion stabilization performance, major fluctuation of steam temperature & pressure, excess and lack of soot blowing, etc. The traditional PID is difficult to coordinate the contradiction between speed and stability. After applying Intelligent Combustion and Operation Technology of LY Power, problems mentioned above can be solved. This technology can realize coal consumption decreasing by 2~3g/kWh, AGC response speed increasing by 2.0%/min, frequency of NOx emission exceeding standard decreasing by 50%, cost for NOx reduction decreasing by 10%~20%, boiler efficiency rising 0.8%.

Intelligent Combustion and Operation Technology.pdf

 

 

No. 2 Baiyunshan Road, Economic and Technological Development Zone, Yantai, Shandong, 264006 China E-Mail:p0003632@chnenergy.com.cn